79 projects. Ten industries.Fifteen countries.

Troubleshooting, logic modification and control system support across process units of the central processing complex on Rockwell (Allen-Bradley) PLC platforms, carried out on running plant.

Plant-wide integration of mixed-OEM machine control systems onto one segmented plant network, with centralised data-gathering servers concentrating line and utility data and relaying it to the enterprise IT layer.

Complete design engineering for electrical, instrumentation and control systems across both plants, including the control system architecture, relay of line and utility data to the plant supervisory and IT layers, and site commissioning.

Turnkey EPC electrification of the plant: MV power introduction, switchgear, plant and line cabling, line electrical, instrumentation and control, PLC engineering, testing and commissioning.

Complete electrification of the new plant under an EPC scope, together with electrical, instrumentation and control installation and commissioning of the Heat and Control snack processing line.

Front-end engineering design for an ammonia leakage detection and emergency shutdown safety system on the refrigeration plant, prepared to satisfy the incoming international shareholder's acquisition due-diligence requirement.

Control systems, panel build, configuration and commissioning for milk processing and milk-product plants and machines supplied by the OEM — Mitsubishi FX, Delta and Fatek PLCs with InduSoft and KingView HMI and SCADA.

SCADA system consolidating data from plant utility machines onto a single supervisory platform, with a centralised data-gathering server presenting plant consumption data to the enterprise layer.

Automation of conveyors, load cells, drives and motors on Rockwell (Allen-Bradley) PLC.

Turnkey control and instrumentation packages for sterilisation autoclaves, RO water plants and distillation units supplied by the machinery OEM — Rockwell, Siemens and Advantech PLCs with InduSoft HMI, delivered as OEM start-up and commissioning engineering.

Complete electrical and control system design, documentation and programming.

Electrical and control system design and programming for pharmaceutical isolator systems.

Automation of autoclave units used for IV sterilisation.

Emerson DeltaV mill-wide DCS: hardware, cabinets, software, programming and commissioning.

Complete DCS implementation with a centralised data-gathering server delivering live production reporting to head office; all engineering services.

Acquisition of production data from the DCS into the client ERP through a centralised data server for head-office and management reporting.

Three-element control with auto, semi-auto and manual operation for complete boiler control.

Turnkey supply, engineering, commissioning and annual start-up support; Schneider Modicon, Siemens S7-300 and InduSoft.

Mitsubishi PLC with various HMI systems.

Mill house automation on Mitsubishi FX 64-point relay-output PLC with GOT operator terminals.

SCADA design and configuration on Wonderware, PLC programming on Siemens S7-1200 and S7-400, factory and site acceptance testing, commissioning and start-up support.

Design, engineering and site implementation of complete wastewater plant automation to the client control philosophy, with centralised data-gathering servers relaying plant data to the client IT layer.

Design, engineering and site implementation on Schneider AVEVA Plant SCADA, EcoStruxure and Modicon M580 PLC, including data concentration to the enterprise reporting layer.

Design, engineering and site implementation on the existing Emerson DeltaV DCS to the client control philosophy, with centralised data-gathering servers collecting station data and relaying it to the client's IT layer.

Systematic inspection and compliance review of every asset installed in Zone 0, Zone 1 and Zone 2 hazardous areas at the chemical plant.

Provision of control, electrical, instrumentation and process engineers and design resources under a long-form services agreement.

Facilitation of SIL determination, LOPA and FSA workshops to IEC 61511 / ISA-84 for process and packaged equipment.

Design, engineering and site implementation for process and batch units and electrical system PLCs.

Migration of the dryer control system from Rockwell SLC 500 to Siemens S7-1500 — logic conversion, HMI redevelopment, I/O verification, testing and cutover on a running plant.

SIL and FSA study support for regional packaged equipment scopes.

SCADA system acquiring compressor data from a gas compression facility 50 km from the fertilizer plant.

Design, installation and commissioning of tank farm metering and safety system on ABB PLC with field panels.

Automation of six reaction vessels for PVA manufacturing.

Full-scale digital system for the plant safety systems across HIMA and Triconex safety controllers — ATG executing the HIMA scope and delivering the safety-system data integration, centralised data gathering and dashboarding layer for both platforms. In progress.

Remote engineering and troubleshooting support on Siemens burner management and gas-oil separation plant control systems.

Supply of control system equipment, panels and associated services.

Integration of flow meters and control valves across the crude processing and storage plant into the DCS, valve line-up sequencing and inventory.

MAC interface and systems-completions services on Honeywell DCS; long-form services contract.

Commissioning of HIMA SIL 4 safety system for the Forcados Island crude oil facility.

Pre-commissioning and commissioning of Yokogawa CENTUM CS3000 / CENTUM VP DCS and ProSafe-RS safety systems; plant-wide SIS engineering across twenty-seven redundant safety controllers.

Field commissioning services under long-term services agreement.

Deployment of systems engineers to Siemens Abu Dhabi for execution of ongoing control and safety projects.

Yokogawa CENTUM CS3000 DCS and ProSafe safety system engineering and commissioning.

Provision of safety system engineers for HIMA regional SIS projects.

Plant-wide control system support and SCADA consolidation onto a central data-gathering server; Schneider, Siemens and Rockwell systems.

Appointed project management consultant and training provider for an ongoing Yokogawa project.

Troubleshooting, rectification and start-up support; Siemens Moore QUADLOG with Wonderware.

Redundant Rockwell ControlLogix system: programming, development and project management.

Installation, testing and commissioning of instrumentation and control; Siemens PCS 7.

Maintenance and troubleshooting at a major gas processing facility under long-form services contract.

Supply, design, engineering and commissioning of fire and gas detection and monitoring systems across nine compressor stations.

Training delivered to 14 and 19 IE&C staff on Rockwell and Siemens PCS 7 turbine and process control systems.

Annual maintenance contract for PLC-based control system support.

Upgrade of genset HMI application with Muller PLC interface.

Turnkey re-engineering of MV and LV emergency diesel generator control: Siemens S7-400H / S7-300 logic redevelopment, WinCC / PCS 7 HMI, TP1200 panel replacement, Foxboro DCS integration, jetty mooring SCADA restoration and substation energy-meter gateway communication restoration, including functional testing and commissioning.

Integration of flow computer and gas chromatograph data into Yokogawa CENTUM VP DCS, hardware and software.

Integration of flow computer and gas chromatograph data into Yokogawa CENTUM VP DCS, hardware and software.

Commissioning of more than twenty LV switchgear automatic transfer systems on GE VersaMax PLC and Yokogawa CENTUM VP DCS.

Commissioning of new LV switchgear: I/O, DCS logic, graphics, alarms and trends on Yokogawa CENTUM VP.

Supervision of electrical and control systems for a 50 MW power plant at Huambo.

Switchgear upgrade project from initial design through installation and commissioning.

Installation and commissioning of Siemens PCS 7 power management system for the LG-7 extension.

Installation and commissioning of Siemens PCS 7 power management system for revamp and upgrade works.

Replacement of the legacy Sensys Intellimax SCADA with a PC-based supervisory system using Mitsubishi GOT visualisation over Mitsubishi Q-series PLCs, including data concentration for plant reporting.

Complete electrical, instrumentation and control supervision, installation, testing and commissioning; Honeywell Experion DCS.

Centralised data gathering from both plants and head-office monitoring of operational KPI data on ABB PGIM.

Combined head-office and mobile monitoring of plant KPI data interlinked with the associated sugar mill on ABB PGIM.

FEED / basic design package together with control system detail design and electrical and instrumentation detail design. Design scope delivered; the balance of the project was cancelled by the client.

Commissioning of Siemens S7-1500 system for the oiler machine.

Rockwell CompactLogix based control system for an aluminium extrusion plant.

Replacement of steel melt shop HMI hardware and migration of the supervisory application to WinCC V8.1, including configuration, testing and site commissioning.

Troubleshooting of Siemens S7-1200, S7-1500, S7-300 and S7-400 systems across several plant areas.

BMR solution on Modicon Quantum including instrumentation supply, control system design, development and commissioning.

Turnkey control system solution including instrumentation supply, design, development and commissioning.

Design, manufacture and installation of fire and gas mimic panels.

Design, manufacture and installation of the water pumping system for the facility.

Design and supply of passenger baggage handling and weighing systems.

Design, fabrication, manufacture, FAT and installation of switchgear for service areas, toll stations and rest areas.

Supply of boiler control systems in collaboration with the instrumentation vendor of ATG's joint venture; Mitsubishi FX, Siemens and Rockwell platforms.